Motor Remote Switch 433MHZ Motor Forwards Reverse Stop Wireless Switch Power Saving 6MA DC3V 3.7V 4.2V 4.5V 5V 6V 7.4V 9V 12V - B07BXKT3K1

This fits your .

Product description

*The world's smallest micro-motor forward and reverse Remote controller, it input DC3V-12V output DC3V-12V , to control the output positive (VCC+) and negative(GND-) exchange, voltage from DC3V to 12V is ok


*MOS non-contact （Contactless) (No Noise ) silent receiver, ultra-low power standby current is only 0.5mA, it is suitable for battery-powered motor, especially the door mini motor which with a small battery-powered.


1.Working voltage: DC3V-12V ( battery please more than DC3.7V)(Wide working voltage DC3V-12V , 3.3V 3.6V 3.7V 4.5V 5V 6V 7.4V 9V 12V All is ok)

2.Working current: 6ma

3.Standby current: 0.5ma

4.Operating frequency: 433.92MHZ

5.Size: 21*11*5mm


*(Ultra low standby current, it is suitable for battery-powered, when it is standby will automatically enter the low-power sleep state, please press the remote control button hold for 0.5 seconds or more)

*Maximum load: 0.4A (400ma mA) have better load less than 0.2A (200ma mA)

The receiver itself with overcurrent protection, when the current exceeds the rated current, will be entered into turn off power protection, such as the motor to start or block the current is doubled, beyond the rated current will be flash

Working Mode：

*1.Momentary-----Press the button “Up arrow”,the Motor Forward,Release is Stop;Press the button“Down arrow”, the Motor Reverse,Release is Stop.

*2.Latched------Press the button“Up arrow”the Motor Forward,Press “Square button ” is Stop;Press the button“Down arrow”, the Motor Reverse,Press “Square button ” is Stop

Warm Small Notice: we send latched mode default .


Package Include:
1 x Receiver(without cover)
1 x Transmitter(with battery)

Motor Remote Switch 433MHZ Motor Forwards Reverse Stop Wireless Switch Power Saving 6MA DC3V 3.7V 4.2V 4.5V 5V 6V 7.4V 9V 12V - B07BXKT3K1