Product Code: | B01FJV1FXA |
Availability: | In Stock |
This fits your .
NOTE:
First use, you should turn on the power and keep the switch at ON, then Charge the solar product by placing it under direct sunshine for 3-4 hours.
Then the light can work normally. (Tips: because the battery may be run out during the sale process, so we need charge the battery when first use.)
Specifications:
1.Solar Panel: polycrystalline silicon 2V, 1.5W
2.Battery: 3.7V/2200mAh Rechargeable lithium battery
3.Light Source:4pcs white LED
4.Lumens:High 80LM Low 50 LM
5.Color temperature:6000-7000K.
6.Charging Time:4.5h.
7.Working Time:8-10h.
8.Material:ABS,PP.
9.Waterproof Rate:IP44.
Features:
1.Upgrade 200 Lumens. 4 x 50 Lumen enhanced LED, super bright for daily lighting.
2.Built-in 3.7V/2200mAh lithium rechargeable battery,10 hours working hours after full charge.
3. 2 in 1 Installation. Stick into the ground / Use included screws to mount on the wall.
4.When the switch is at the "LOW" position, light intensity should be lower; when the switch is at the "HIGH" position,the light intensity is higher.
5.Illumination time after full charge :5-6 hours at "HIGH" level, 9-12 hours at "LOW" level.
6.The spotlight won't light up in bright place. To turn on the light in the daytime, please fully cover the solar panel and make sure there is no light source or sunshine detected. Please peel off the film covered on the panel before putting it under the sun for charging.
YINGHAO [New Upgraded Version] Solar Outdoor Indoor Spot Light 2 in 1 Installation IP44 Waterproof Separated Panel and Light Outdoor Landscape Lighting Waterproof Solar Wall Light Security Lights - B01FJV1FXA